Fiberglass Frames |
|---|
Delivered factory assembled or knocked down for assembly onsite. Fiberglass frames are solid 1/4" thick FRP profiles, pultruded to exact dimensions. The non-corrosive polymer in most cases exceeds the strength of steel. Dimensionally equivalent to hollow metal frames, our pultruded FRP frames use comparable installation methods. Prepared for standard door hardware, all frames are available for existing wall anchor, T-anchor, or drywall shipped in either chemically-welded or knock-down form. We offer 2 standard frame depths -- 5.75" and 7.75" -- and also a Factory Adjustable frame system that expands from 4.5" to 12" depth. |
FRP Frames install the same as steel frames. |
 |
| Standard Frame 2" Face |
 |
|---|---|
| Chemically Welded Frame Corner |  |
| Knock Down / Site Assembled Corner (outside) |
 |
| Knock Down / Site Assembled Corner (inside) |
 |
| Frame Corner Reinforcement (end view) |
 |
| Frame Corner Reinforcement (side view) |
 |
| 5 3/4" Frame Profile |  |
| 5 3/4" Retrofit Frame |  |
| 7 3/4" Frame Profile |  |
| Factory Adjustable 4 1/2" to 12" Frame Profile Now with 2" or 4" face! |
 |
| 3" Single Rabbet Profile |  |
| 4" Head Profile |  |
| Mullion Profile |  |
| Concrete or Existing Masonry, Bolted Steel or Wood Framing |  |
| Base Anchor |  |
| T-ANCHOR New Masonry |
 |
