|
Because it's true.
Because our entire door panel is
pultruded polymer reinforced with glass fiber.
Technically speaking, this means that our
proprietary technology produces monolithic FRP door panels using polymers
selected for their immunity to corrosive environments, UV stabilized resin
and a reinforced content of 65% by weight.
|
Tensile Strength |
55,000 psi |
ASTM D638 |
|
Compressive Strength |
50,000 psi |
ASTM D695 |
|
Flexural Strength |
50,000 psi |
ASTM D790 |
|
Modulus of Elasticity |
3.5 X 106
|
ASTM D790 |
|
Coefficient of Thermal Expansion |
5.5 X 10-5 |
ASTM D696 |
|
Insulation Factor (approx.) |
R9 |
|
|
COMPLETE DOOR & FRAME SPECS pdf
Complete
Door & Frame Specs
(Word.doc
editable
worksheet) |
Our unique machining process produces
entire door panels with NO seams and does NOT rely on gelcoat as does the
typically 'hand laid' form-built FRP door. This means that our door panels
CANNOT delaminate, craze or fuz.
Additionally, our doors contain NO
corrosive material (ie: aluminum or steel) in their framing or embedded as
hardware or full mortised hinge installation reinforcement. This means
our doors simply cannot degrade from the inside>out.
It also means greater
non-conductivity and greater resistance to every known degrading
environmental factor. So why put up with that problem door any longer?
Make sure every door in your new or retrofitted facility does what doors
are supposed to do.
Give us a call now!!!
870-448-4406 |
